Ensembles and jamming
ENS-01Which instruments pair well with a handpan?#
beginner
Short answer. Anything that either fills the space the handpan leaves empty, or plays freely enough to follow your scale. In practice that means sustaining melodic instruments, low drones, light percussion and voice.The handpan’s characteristics dictate the answer. It occupies the middle register, it sustains, it has a fixed set of notes, and it is quiet. So the pairings that work best either sit outside its register, sit outside its harmonic constraints, or are quiet enough to sit beside it.
Voice. The most natural partner. A singer can meet any scale, adds the one thing the handpan cannot do (words and continuous pitch), and matches its volume. The only planning needed is finding a comfortable key.
Melodic wind instruments. Flute in its various forms, including bansuri, Native American style flutes and low whistles, plus clarinet, saxophone and duduk. They sustain, they sit above or below the handpan’s core register, and a player who can hear a scale can adapt. Native American style flutes are usually pentatonic minor and pair with minor handpan scales readily.
Drones and low instruments. Didgeridoo, shruti box, tanpura, cello, double bass, low fretless bass. A drone underneath a handpan is very effective because it supplies a tonal centre and lets the handpan float. Bass players in particular need to know your root and scale before they start.
Guitar, harp and piano. All excellent, all requiring some negotiation, because they can play notes your instrument cannot and will wander out of your scale if unwarned. See ENS-02.
Light percussion. Frame drum, cajon, shakers, udu, kalimba. See ENS-04 for how to avoid clashing.
Another handpan. The most obviously compatible partner in timbre and the least compatible in pitch, unless the scales are related. See ENS-05.
Harder pairings. A full drum kit, brass sections, amplified electric guitar and anything else loud will bury an unamplified handpan. That does not mean do not do it; it means amplify.
The genuinely useful question is not which instrument, but which player. A partner who listens, leaves gaps and asks what scale you are in will sound better on almost any instrument than a virtuoso who plays over you.
See also: ENS-07
ENS-02How do I jam with a guitarist when my instrument is stuck in one scale?#
intermediate
Short answer. Tell them the root and the exact notes you have, and ask them to stay inside that set. A handpan is not a limited instrument in a jam, it is a specified one, and the constraint sits on them, not on you.Start by knowing your own notes precisely, not just the scale name. Handpan scale names are inconsistent between makers, and “D Kurd” means a set of specific pitches, not a mode a guitarist will recognise. Write the notes down: for example, a common nine-note D Kurd is D3, A3, Bb3, C4, D4, E4, F4, G4, A4. Hand that list over. Any competent guitarist can work with a note list in a way they cannot work with a name they have not heard.
Then translate it. Most handpan scales map onto a familiar mode with a root. A Kurd layout is essentially D natural minor, which is D Aeolian, so the guitarist can think in D minor and stay in the same seven notes. An Integral or Celtic layout implies a different mode. A pentatonic layout is more forgiving still, because pentatonic scales fit over several chords.
What to ask the guitarist for. Simple, sustained chords built from your notes, with a clear tonal centre. In D minor, Dm, F, Gm, Am, Bb and C all use only your notes. Ask them to avoid the two things that most often break it: chords with notes you do not have, and capo changes that shift the key without telling you.
When keys do not match. If they want to play in a key you cannot reach, three options exist. They capo or transpose to your key, which is easy for guitar. You play sparsely and percussively, treating the handpan as a texture rather than a harmony instrument. Or you both accept a partial match, where your instrument supplies a modal drone that works against several of their chords, which is often more interesting than it sounds.
A subtlety worth knowing. Handpans are usually tuned to A = 440 Hz, but 432 Hz instruments exist and are common in some corners of the community. A 432 Hz instrument is roughly a third of a semitone flat against a standard-tuned guitar and will sound out of tune with it. Establish this before the first note, not during the second chorus.
See also: ENS-03, Scales and music theory
ENS-03How do I accompany a singer and find a key that suits them?#
intermediate
Short answer. Ask the singer to sing the song unaccompanied, find their tonic on your instrument, and see whether it lands on a note you own. If not, either they move or you play texturally.Singers are more flexible than guitarists in some ways and less in others. They can meet any scale by ear, which is a huge advantage. But their comfortable range is a physical fact, and asking someone to sing a fourth higher than suits them ruins the performance.
The practical procedure. Have them sing the melody with no accompaniment. Find the note they finish on, which is usually the tonic. Play it on your handpan. Three outcomes:
- It is your root. Excellent, play normally.
- It is another note in your scale. Often still workable, since it means the song sits in a different mode of your scale. A song whose tonic is the fifth of your Kurd instrument sits in a Phrygian-flavoured space, which suits some material and not others.
- It is not on your instrument at all. You cannot play it. Ask if they can move.
When a singer can move. Most can shift a whole tone either way without much loss, and many can shift more once the song is not tied to a recorded version. The phrase to use is “can you try it starting on this note”, played rather than named.
When they cannot move. Play percussively rather than melodically. Handpan shoulder strokes, gu hits and muted taps carry a groove without asserting pitch. A drone on a note the two keys share can also work. Both are honest musical solutions, not consolation prizes.
Register and arrangement. The handpan sits right in the middle of most vocal ranges, which is exactly where a voice needs space. Play sparsely under the verses. Save the higher tone fields and busier patterns for instrumental sections. Resist the temptation to keep a continuous rippling ostinato going underneath a lyric: it is beautiful alone and exhausting under a singer.
Buying with singers in mind. If accompanying a specific singer is a priority, choose the instrument’s scale around their range rather than buying the scale you like and hoping. This is one of the few genuinely strong arguments for a particular scale.
ENS-04How do I play with djembe, cajon or frame drum without clashing?#
intermediate
Short answer. Agree who holds the pulse and who decorates it, and keep out of each other’s register. Most handpan and percussion clashes are two people both playing busy syncopation in the same frequency band.The handpan is a percussion instrument with pitch, so playing it against other percussion means solving both a rhythmic and a spectral problem.
Rhythmic roles. Decide explicitly, out loud, before you play. The usual working arrangement is that the drummer holds a steady, fairly simple groove and the handpan plays melody and syncopation over it. The reverse also works, with the handpan laying a repeating ostinato while the drummer improvises. What does not work is both people improvising rhythmically at once, which is what usually happens in an unplanned jam and is why so many of them turn to soup.
Register and dynamics. A djembe bass tone and a cajon bass both live around 60 to 120 Hz, below your instrument, which is good. Their slap tones live at 2 to 5 kHz, which is exactly where your attack lives, and that is where the mush comes from. If you are being drowned, it is almost always slaps. Ask the drummer to favour tone and bass strokes and use slaps as accents rather than as the constant top layer. A frame drum is much easier to sit alongside because its whole voice is lower and softer.
Volume. A djembe played with full slaps is dramatically louder than a handpan. Ask for a genuine reduction in dynamic level, not just intention. If the drummer cannot play that quietly, either amplify or change instruments; a cajon played with brushes or a frame drum will fix it in a way that willpower will not.
Space. The single most effective request is to leave the downbeat and the space around it partly empty. The handpan’s long decay means each of your notes keeps sounding through the following beats, so a groove that sounds sparse when you play it alone is already fairly full.
Tempo. Handpans are hard to play very fast cleanly, and drummers naturally push. Agree the tempo, and consider counting it in yourself.
See also: ENS-06
ENS-05Can two handpans in different scales play together?#
intermediate
Short answer. Sometimes, and it depends entirely on how many notes the two sets share. Compare actual note lists, not scale names. Two instruments sharing a root or sharing six or seven notes will work; two unrelated scales will not.The check is arithmetic. Write out both note lists and count the overlap.
Same scale, different instrument. Easiest case, and the most common in handpan duos. The differences are octave placement and any extra bottom or top notes, which are an asset rather than a problem: one player can take the low register and the other the high.
Related scales. Many pairs turn out to be modes of the same collection. A D Kurd (D natural minor) and an F major instrument contain the same seven pitch classes, so they are fully compatible, just with different tonal centres. Similarly, instruments a fifth apart often share six of seven notes. This is where most successful mixed-scale duos live.
Overlapping but not identical. Where the sets share five or six notes, you can play together by staying on the shared notes and treating the differing ones as forbidden. It restricts both players but produces real music. Write the shared notes down and mark them on the instruments with a small piece of tape until you internalise them.
Unrelated scales. A D Kurd and an E Hijaz will produce dissonance you did not choose. You can still play together rhythmically, with one player muting or playing gu and shoulder strokes only, but harmonically it is a losing fight.
Two considerations that catch people out. First, tuning reference: a 432 Hz instrument and a 440 Hz instrument will not work together no matter how well their scales match. Second, temperature: handpans drift slightly sharp as they warm, so two instruments that have been in different environments can be audibly apart until they settle. Let both sit in the same room for half an hour.
Buying a second instrument. If duo playing is the goal, the practical advice is to choose the second instrument for compatibility with the first rather than for novelty, either the same scale in a different register or a mode of the same collection.
See also: Scales and music theory
ENS-06What is the etiquette at drum circles and open jams?#
beginner
Short answer. Listen for a full cycle before you play, support the existing groove rather than starting a new one, and accept that in a loud circle the handpan is a texture nobody can hear rather than a lead instrument.Drum circles and handpans have a mixed relationship. The instrument attracts enormous attention when it appears, which is pleasant for about ten minutes and then becomes its own problem, because a circle of djembes will bury it and a circle of people who want to touch it will not stop asking.
The basic etiquette, which is not handpan specific.
- Arrive, sit down, and listen through several cycles of whatever is happening before you make a sound.
- Play into the existing groove. Do not start a new tempo or a new feel because you have an idea.
- Match the dynamic of the circle rather than fighting it.
- Do not solo unless invited or unless the circle has clearly opened space.
- If the groove collapses, stop and let it rebuild rather than trying to rescue it with more notes.
Handpan specifics.
- Expect to be inaudible in a circle of more than about six loud drums. If you want to be heard, sit near the quieter players, or bring a small battery-powered amp and use it modestly.
- Your scale is fixed and probably minor. In a circle with other pitched instruments, say your root out loud early.
- Consider what you contribute that nobody else can: a sustained tonal centre, a melodic hook, or the gu as a bass voice. Duplicating what six drummers already provide adds nothing.
The instrument-touching problem. Handpans invite hands. Decide your policy in advance and state it kindly rather than being caught off guard. Many players allow supervised playing with clean hands and no rings, and simply say so before it becomes awkward. Others do not, which is entirely reasonable given that a hard strike with a ring can damage the tuning.
Practical care in a circle. Keep the instrument on a stand rather than on the ground, keep the case shut and out of the walking path, and do not leave it unattended. See ENS-12 for more on this.
See also: ENS-12
ENS-07How loud is a handpan compared with other instruments, and how do I avoid being buried?#
beginner
Short answer. Roughly in the region of an acoustic guitar or a quiet hand drum, and far below a djembe, a drum kit or a brass instrument. If you are playing with anything loud, amplify rather than hitting harder.Precise figures are unhelpful because they depend on the instrument, the striking technique and the distance, but the ranking is stable and useful. A handpan played musically sits somewhere near a fingerpicked acoustic guitar or a frame drum. A cajon is louder. A djembe with slaps is much louder. A drum kit played at rock dynamics is in another category entirely, as are trumpet, saxophone and any amplified instrument.
The trap. The instinctive response to being inaudible is to play harder. On a handpan this fails twice over. The instrument does not get much louder past a certain point, because the tone fields have a limited excursion. And hitting harder changes the tone for the worse, pushing the note sharp momentarily, exciting unwanted partials and producing a harsh clang instead of a note. Worse, sustained hard striking is genuinely one of the ways instruments get detuned. Playing loud is a false economy that can cost you a retune.
What actually works.
- Amplify. A pickup and a small speaker solves the problem permanently. See the recording and amplification section.
- Ask for less. In an acoustic setting, one conversation about dynamics is worth more than any technique. Most musicians will happily play softer if told the handpan is inaudible; they usually just cannot tell from where they sit.
- Change register and rhythm. You are more audible playing in the gaps than playing over the top. A note placed in a rest cuts through at a fraction of the effort.
- Move. Physical position in a circle or on a stage changes your audibility more than you expect. Getting off the floor onto a stand and away from soft surfaces helps too.
- Choose the ensemble. Some combinations simply do not work acoustically, and recognising that early saves a lot of frustration.
Position and projection. The handpan radiates upwards and outwards from the top shell, and its perceived level is much higher for the player leaning over it than for anyone sitting two metres away. Do not judge your own volume from the playing position; ask someone.
See also: Live amplification, Playing and technique
ENS-08How do I use a looper as my duo partner?#
intermediate
Short answer. Treat the loop as another musician with a fixed part: build it deliberately, leave it space, and know how to get rid of it. The technical side is easy; the musical discipline is not.A looper turns a solo handpan player into an ensemble, which is why so many players end up with one. It also introduces problems that a human partner would solve for you, and being aware of them is most of the skill.
Build from the foundation up. Record the pulse first, typically gu strokes and low tone fields, because everything you play afterwards is anchored to the timing of that first pass. A rushed first bar is permanent. Many players record a four-bar foundation rather than one bar, so that small timing errors are diluted and the join is less obvious.
Leave more space than feels right. The handpan sustains, so a loop of ringing notes is already dense before you play a single live note over it. A loop that sounds sparse and slightly empty on its own is usually the correct density. The most common failure in handpan looping is three full-sounding layers with nowhere for the melody to go.
Register discipline. Give each layer its own territory: low pulse, mid ostinato, high melody. If two layers occupy the middle, the loop turns to a wash and you lose the thing that makes handpan playing beautiful, which is the clarity of individual notes.
Dynamics. Loops repeat at a constant level forever, which is unmusical. If your looper allows per-track volume control by foot, use it: bringing the ostinato down under a melody and back up for a chorus is what makes a looped piece sound arranged rather than automatic.
Know how it ends. Decide before you start what the exit is. Fade the layers out one at a time, or stop everything on a struck note, or undo the top layer and end on the foundation. A loop that just gets switched off at the end of a piece is the audible sound of running out of ideas.
Practise the footwork silently. Both your hands are on the instrument and you are leaning forward, so the physical action of hitting a footswitch accurately on a downbeat is harder than it is for a standing guitarist. Rehearse start, close, undo and stop until they are automatic, then add music.